If the SSID (WIFI network name) of your Wi-Fi network is hidden you can manually configure the Wi-Fi network by following the below steps:


Enter Device Settings

  • Press the back button on your Shaker Solo to enter the System Mode menu 
  • Ensure that the Device Settings option is highlighted and press the green key on the keypad


Please ensure you have your network mode set to WIFI 

  • Scroll down to the Wi-Fi Setup option from the Device Settings menu and press the green key on the keypad
  • Scroll down to Manual Setup and press the green key on the keypad


Please note that due to PCI compliance you must connect to a network with a password


You will now be prompt to enter your Wi-Fi SSID (Wi-Fi network name) press the green key on the keypad to confirm

To learn more about Typing on the Shaker Solo, click here



You will now be prompted to enter the password for the entered Wi-Fi SSID (Wi-Fi network name) press the green key on the keypad to continue


  • Once the correct password has been entered the Wi-Fi signal indicator will appear next to the battery indicator on the home screen.